QTech QSW-2900 - Show Port-Isolation

Global configuration mode
【Example】
！Add Ethernet 0/1, Ethernet 0/3, Ethernet 0/4, Ethernet 0/5, Ethernet 0/8 to be
descendentisolation port.
QTECH(config)#port-isolation ethernet 0/1 ethernet 0/3 to ethernet 0/5 ethernet
0/8
！Remove ethernet 0/3, Ethernet 0/4, Ethernet 0/5, ethernet 0/8 from downlink
isolation port.
QTECH(config)#no port-isolation ethernet 0/3 to ethernet 0/5 ethernet 0/8
6.1.6 show port-isolation
Use show port-isolation command to display port-isolation information.
show port-isolation
【Command configuration mode】
Any configuration mode
【Example】
6-7