QTech QSW-2900 - Show Radius Host

！Configure the shared key for the RADIUS server with the name of red to be
12345
QTECH(config-aaa-radius-red)#secret-key 12345
【Related command】
radius host
8.2.7 show radius host
Use show radius host command to display RADIUS server information, such as:
primary ip address, second ip address, authentication port, accounting port,
authentication key, etc.
show radius host [ radius-scheme ]
【Parameter】
radius-scheme：The name of RADIUS server
【Command configuration mode】
Any configuration mode
8-19