QTech QSW-2900 User Manual

Chapter 4 Multicast Protocol Configuration
Command
4.1 Static Multicast Configuration Command
Static multicast configuration command includes:
 multicast mac-address
 multicast mac-address vlan interface
 show multicast
4.1.1 multicast mac-address
Use multicast mac-address command to create a multicast group. Use no
multicast mac-address command to remove multicast group formed by specified
mac address and related vlan-id.
multicast mac-address mac vlan vlan-id
no multicast [ mac-address mac vlan vlan-id ]
【Parameter】
mac：The mac address of multicast group displayed in the form of multicast
4-1

QTech QSW-2900 Specifications

General

Brand	QTech
Model	QSW-2900
Category	Network Router
Language	English