QTECH(config)#interface ethernet 0/0/1
1.1.9 muser
Use muser command to enable user’s RADIUS remote authentication.
muser { local | { radius
radiusname
{ pap | chap } [ local ] } }
【Parameter】
radiusname：RADIUS server configuration name
【Command configuration mode】
Global configuration mode
【Usage】
Configure authentication of RADIUS remote authentication only or using RADIUS
remote authentication first, if RADIUS fails, local database authentication is used.
RADIUS authentication supports PAP or CHAP ways.
Enable RADIUS remote authentication needs correct RADIUS server
configuration.
1-9
To Next Page
Loading...
Need help?
General
