【Example】
！Configure 802.1x re-authperiod of ethernet 0/3 to be 1800
QTECH(config)#dot1x timeout re-authperiod 1800 interface ethernet 0/3
！Restore all the re-authperiod to the default of 802.1x re-authperiod
QTECH(config)#no dot1x timeout re-authperiod
8.3.10 dot1x user cut
Use dot1x user cut command to remove specified online user.
dot1x user cut { { username username } | { mac-address mac-address [ vlan
vlan-id ] } }
【Parameter】
username: the username to be removed
mac-address：Mac address of user to be removed
vlan-id：The vlan of user to be removed
【Command configuration mode】
Global configuration mode
8-36
To Next Page
Loading...
Need help?
General
