re-authperiod.
dot1x timeout re-authperiod seconds [ interface interface-num ]
no dot1x timeout re-authperiod [ interface interface-num ]
【Parameter】
seconds: 802.1X re-authperiod ranges from 1 to 65535 seconds
interface-num：Optional interface number
【Default】
The default 802.1X re-authperiod is 3600 seconds
【Command configuration mode】
Global configuration mode
【Usage】
This command is effective after 802.1X authentication enables.
When no port is specified, use dot1x timeout re-authperiod command to modify
802.1x re-authperiod of all ports，or specified port is modified.
8-35
To Next Page
