【Command configuration mode】
VLAN configuration mode
【Usage】
This command can assign a description to the current VLAN.
【Example】
！Specify the description string of the current VLAN as “market”
QTECH (config-if-vlan)#description market
3.1.2 show vlan
Use show vlan command to display the information about the specified VLAN
show vlan [ vlan-id ]
【Parameter】
vlan-id：Specified the VLAN ID is in the range of 1 to 4094.
【Command configuration mode】
Any configuration mode
3-2
To Next Page
Loading...
Need help?
General
