show spanning-tree mst instance instance-num interface [interface-list ]
【Parameter】
interface-num：List of Ethernet ports to be added to or removed from a VLAN.
This keyword needed to be provided in the form of interface-type +
interface-number. Interface-type is Ethernet and interface-number is
device/slot-num/port-num, in which device is stackable device number whichi is in
the range of 0 to 7, slot-num is in the range of 0 to 2, and port-num is in the range
of 1 to 24. Seriate interfaces with the same type can be linked by to keyword, but
the port number to the right of the to keyword must be larger than the one to the
left of the keyword, and this argument only can be repeated for up to 3 times.
【Command configuration mode】
Any configuration mode
【Example】
！Display the information of port 1 in MSTP instance 0
QTECH(config)#show spanning-tree mst instance 0 interface ethernet 0/0/1
7.2.11 spanning-tree mst config-digest-snooping
Use this command to enable digest snooping to realize the interconnection with Cisco private MSTP
protocol. Use the no command to disable this function.
spanning-tree mst config-digest-snooping
7-30
To Next Page
Loading...
Need help?
General
