QTech QSW-2900 - Show Garp Permit Multicast

【Command configuration mode】
Global configuration mode
【Example】
! Add multicast group 01:00:5e:00:01:01 vlan 1 to GMRP
QTECH(config)#garp permit multicast mac-address 01:00:5e:00:01:01 vlan 1
4.2.12 show garp permit multicast
Use show garp permit multicast command to display static multicast group
permitted learning by GMRP.
show garp permit multicast
【Command configuration mode】
Any configuration mode
【Example】
! Display the static multicast permitted by GMRP
QTECH(config)#show garp permit multicast
4-17