address, such as: 01:00:5e:**:**:**
vlan-id：Range from 1 to 4094
【Command configuration mode】
Global configuration mode
【Usage】
To create multicast group, MAC address should be multicast group address, and
vlan-id must be existed. If there is no parameter in any multicast mac-address
command, all multicast group are removed.
【Example】
！Create a multicast group
QTECH(config)#multicast mac-address 01:00:5e:01:02:03 vlan 1
4.1.2 multicast mac-address vlan interface
Use multicast mac-address vlan interface command to add interface to existed
multicast group. Use no multicast mac-address vlan interface command to
4-2
To Next Page
Loading...
