Use secret-key command to configure a shared key for the RADIUS server. Use
no secret-key command to restore the default shared key.
secret-key key-string
no secret-key
【Parameter】
key-string：Shared key of 1 to 16 characters of strings
【Default】
The default key is Switch
【Command configuration mode】
RADIUS configuration mode
【Usage】
There are such configuration as system ip address and verified key in RADIUS
server. Only when the system key is the same as the RADIUS server key, the
authentication requirement is accepted by RADIUS server.
【Example】
8-18
To Next Page
Loading...
