interface-list：List of Ethernet ports to be added to or removed from a VLAN. This
keyword needed to be provided in the form of interface-type + interface-number.
Interface-type is Ethernet and interface-number is slot-num/port-num, in which
slot-num is in the range of 0 to 2, and port-num is in the range of 1 to 24.
Seriate(sequential?) interfaces with the same type can be linked by to keyword,
but the port number to the right of the to keyword must be larger than the one to
the left of the keyword, and this argument only can be repeated for up to 3 times.
【Command configuration mode】
Any configuration mode
【Usage】
Key word “interface-list” is optional. If this keyword is lacking, all the information of
the interfaces is displayed, or information of only specified interfaces is displayed.
【Example】
！Display information of gmrp interface Ethernet 0/1, ethetnet 0/2, Ethernet 0/3,
Ethernet 2/1
4-15
To Next Page
Loading...
Need help?
General
