【Parameter】
ACL configuration mode (including 5 configuration modes as: standard, extended,
layer 2, interface, user-defined)
【Parameter】
Entering ACL configuration mode, user this command to establish an ACL
subitem. This command can be used repeatedly. Establish many subitems for
an ACL. There can be 128 subitems in total. If this ACL has activated, add
subitems are not allowed.
【Example】
!Create a standard ACL with the name to be example and specify the matching
order to be deep precedency.
QTECH(config)#access-list standard example match-order auto
Create ACL item successfully!
QTECH(config-std-nacl-example)#permit 192.168.3.1 0
5-62