sntp server command to remove server ip-address.
sntp server ip-address [ key number ]
no sntp server
【Parameter】
ip-address：Server ip-address.
number: To encrypt message when sending requirement to server. Use the
key-number to decipher the message when the reply is received. The
key-number ranges from 0 to 4294967295. 0 means unauthentication.
【Command configuration mode】
Global configuration mode
【Usage】
In unicast mode, server ip-address must be configured, or SNTP client cannot
work smoothly.
【Example】
！Configure unicast server ip-address to be 192.168.0.100
9-15
To Next Page
Loading...
