QTech QSW-2900 User Manual

Use lacp system-priority command to configure lacp system priority. Use no lacp
system-priority command to restore default priority.
The redundancy influence made by LACP system and port priority shows: LACP
providing redundancy system needs guarantee the consistency of the choosing
redundancy for conterminous switches, and user can configure redundancy link,
which is realized by system and port priority. Choose redundancy in following
steps:
1、Make sure which switch is the standard of choice. For exchanging the message,
two switches know each other’s LACP system priority and system mac. They
compare local LACP system priority, the smaller one is the standard; if they have
the same priority, compare the system MAC, the smaller is the standard.
2、Choose redundancy link with the port parameter of the standard switch.
Compare the port LACP priority first, the inferior is the redundant; if they have the
same priority, the larger number of the port is redundant.
lacp system-priority priority
no lacp system-priority priority
2-39

QTech QSW-2900 Specifications

General

Brand	QTech
Model	QSW-2900
Category	Network Router
Language	English