【Command configuration mode】
Any configuration mode
【Usage】
If mac-address is not specified, information of the entire multicast group is
displayed.
【Example】
！Display the information of multicast group with the MAC address to be
01:00:5e:01:02:03
QTECH(config)#show multicast mac-address 01:00:5e:01:02:03
show multicast table information
____________________________________________________________
MAC Address : 01:00:5e:01:02:03
VLAN ID : 3
Static port list : e0/2,e0/3.
4-5
To Next Page
Loading...
