Use absolute command to create absolute time range. Use no absolute
command to delete the configuration of absolute time range.
absolute [ start time date ] [ end time date ]
no absolute [ start time date ] [ end time date ]
【Parameter】
start
time
date
：optional choice. Configure the start absolute time. The form of
time
is hh:mm:ss，using 24 hours. hh is in the range of 0～23，mm is in the range
of 0－59, and ss is in the range of 0－59. The form of
date
is YYYY/MM/DD. day
is in the range of 1～31，month is in the range of 1～12，year is 4 numbers. If the
start time is not configured, it means there is no restriction to the start time but the
end time.
end
time
date
：optional choice. Configure the end absolute time. The form of
time
and
date
is the same as the start time and it must be larger than the start time. If
the end time is not configured, it is the max time of system.
【Command configuration mode】
time-range configuration mode
5-30
To Next Page
Loading...
