QTech QSW-2900 User Manual

no access-group { all | user-group { access-list-number | access-list-name }
[ subitem subitem ] | { [ ip-group { access-list-number | access-list-name }
[ subitem subitem ] ] [ link-group { access-list-number | access-list-name }
[ subitem subitem ] ] } }
【Parameter】
access-list-number：accessing control list number which is in the range of 1 to 399.
access-list-name：the name of accessing list which is the character string and in
the form of initial capitalized characters ([a-z, A-Z]), excluding space and
quotation mark；subitem
subitem ：optional parameter, specifies the subitem in
accessing list which is in the range of 0～127. If it is not specified, all subitems
are activated.
Instruction:
Followings are the parameter of no command.
all：all the activated accessing list must be cancel.（including number and name
ID）
【Usage】
This command supports activating accessing control list of layer 2 and layer 3 at
5-33

QTech QSW-2900 Specifications

General

Brand	QTech
Model	QSW-2900
Category	Network Router
Language	English