tos
tos
：optional parameter which can be categoried according to TOS, it is
number or name which is in the range of 0～15. This parameter can be used in
extended ACL.
[ cos
vlan-pri
]： 802.1p priority which is in the range of 0～7. This parameter can
be used in layer 2 ACL.
ingress { { [
source-vlan-id
] [
source-mac-addr source-mac-wildcard
] [ interface
interface-num ] } | any }：the source information of packet. source-vlan-id means
source VLAN of data packet. [
source-mac-addr source-mac-wildcard
] means the
source MAC address and MAC address wildcard of packet. These two parametes
can determine the range of source MAC address, such as: when
source-mac-wildcard is 0:0:0:0:ff:ff，user is interested in the first 32 bit of source
MAC address (that is the bit position corresponded to the number 0 in wildcard)
interface
interface-num
means the layer 2 ports receiving this packet, any means
all packets received by all ports. This parameter can be used in layer 2 ACL.
egress { { [
dest-mac-addr dest-mac-wildcard
] [ interface
interface-num
| cpu ] } |
any }：destination information of packet.
dest-mac-addr dest-mac-wildcard
5-39
To Next Page
Loading...
