Use username username privilege command to add a user or modify the privilege
or password of the existed user. Use no username username privilege command
to remove specified user.
username username [ privilege level ] { password encryption-type password }
no username username
【Parameter】
username：User name of new users and existed users ranges from 1 to 32
printable characters excluding such wildcards as
'/'、':'、'*'、'?'、'\\'、'<'、'>'、'|'、'"' etc.
privilege：Privilege of new user or the modified privilege of existed user ranges
from 0 to 15. 0 to 1 means user while 2 to 15 means administrator. Caution: the
privilege of administrator cannot be modified.
encryption-type: the value of it is 0 or 7. 0 means non-encryption and 7 means
encryption( It is not supported now).
password：Log in password for new user and modified password of the existed
user ranges from 1 to 16 characters or numbers.
【Command configuration mode】
1-15
To Next Page
Loading...
Need help?
General
