Administrator “admin” can use username change-password to modify the
password of him and others, and other users can use this command to modify his
own password. After inputting this command, user will be asked to input as
following: original password, the username of the password needs modifying,
new password and confirm new password.
username change-password
【Parameter】
Username must be existed.
【Command configuration mode】
Global configuration mode
【Usage】
Only administrator “admin”can modify other user’s password, while others only
can modifies his own. If a user forgets his password, administrator “admin” can
use this command to give him a new one.
【Example】
1-17
To Next Page
Loading...
