Open TFTP server and set file upload path before using this command. Alaram
information saved when uploading is successful.
【Example】
！Upload alarm to 192.168.0.100 by TFTP and saved as abc
12.2.12 upload configuration ftp
Use upload configuration ftp command to upload configuration program by FTP
protocol.
upload configuration ftp ftpserver-ip filename username userpassword
【Parameter】
ftpserver-ip：IP address of FTP server
filename：Filename to be uploaded which cannot be system keyword (such as in
windows operating system, con cannot be filename.)
username、userpassword：Username and password of FTP server
【Command configuration mode】
12-19
To Next Page
Loading...
