QTECH(config)#bootp
12.4.2 clock set
Use clock set command to configure system clock.
clock set
【Parameter】
HH:MM:SS：current time，HH ranges from 0 to 23，MM and SS range from 0 to 59
YYYY/MM/DD：Means current year, month, and date. YYYY ranges from 2000 to
2099，MM ranges from 1 to 12，and DD ranges from 1 to 31
【Default】
The default time is 2004/01/01 0:0:0
【Command configuration mode】
Privileged mode
【Usage】
Use this command to set current date and time when needing it.
12-27
To Next Page
Loading...
