udpport：destination interface address for sending udp packet which is in the
range of 1 to 65535 and defaulted to be 62929；
first_ttl：initial ttl of sending packet which is in the range of 1 to 255 and
defaulted to be 1；
maximum_hops：the max ttl of sending packet which is in the range of 1 to 255
and defaulted to be 30；
time_out：the overtime of waiting for the response which is in the range of 10 to 60
with the unit of second and default to be 10 seconds；
target_name：destination host or router address
【Command configuration mode】
Any configuration mode
【Usage】
Use this command to tracert the router and the time that switch reaches the
destination.
【Example】
12-52
To Next Page
Loading...
