ranes from 16 byte.
【Default】
Following users are default to exist: (1)initialmd5（required md5 authentication），
(2) initialsha（required sha authentication），(3) initialnone（non- authentication）
【Command configuration mode】
Global configuration mode
【Usage】
At most 64 groups can be configured.
【Example】
！Add user “user1” for local engine to group “grp1”，and configure this user not to
use authentication and encryption.
QTECH(config)# snmp-server user user1 grp1
！Add user “user2” for local engine to group “grp2”，and configure this user to use
md5 authentication and non-encryption with the auth-password to be 1234
12-77
To Next Page
Loading...
