QTech QSW-2900 - Page 403

Global configuration mode
【Example】
！Enable global LLDP
QTECH(config)#lldp
13.1.2 lldp hello-time
Use lldp hello-time command to configure LLDP hello-time. Use no lldp hello -time
command to restore to default LLDP hello-time.
lldp hello-time <5-32768>
no lldp hello -time
【Default】
Default LLDP hello-time is 30 seconds
【Command configuration mode】
Global configuration mode
【Example】
13-87