no mirror source-interface command to remove mirror source-interface.
mirror source-interface { interface-list | cpu } { both | egress | ingress }
no mirror source-interface { interface-list | cpu }
【Parameter】
interface-list：List of interfaces provides in the form of interface-num [ to
interface-num ], this can be repeated for 3 times.
cpu：Means CPU port
both：Means both egress and ingress can be mirrored
egress：Means egress mirror
ingress：Means ingress mirror
【Command configuration mode】
Global configuration mode
【Example】
！Configure Ethernet 0/0/1 to ethernet 0/0/12 to be mirror source-interface
2-29
To Next Page
Loading...
