interface-num：List of Ethernet ports to be added to or removed from a VLAN.
This keyword needed to be provided in the form of interface-type +
interface-number. Interface-type is Ethernet and interface-number is
slot-num/port-num, in which slot-num is in the range of 0 to 2, and port-num is in
the range of 1 to 24. Seriate interfaces with the same type can be linked by to
keyword, but the port number to the right of the to keyword must be larger than
the one to the left of the keyword, and this argument only can be repeated for up
to 3 times.
【Command configuration mode】
Any configuration mode
【Usage】
Keyword “interface-list” is alternative. If there is no keyword, the alarm all-packets
of all the interfaces are displayed, or the information of specified port is displayed.
【Example】
！Display the alarm all-packets interface information of Ethernet 0/0/1
2-48
To Next Page
Loading...
