Chapter 4 Configuring Your Library
Configuring Devices
Scalar i2000 User’s Guide 159
6 Using the text boxes provided, provide the following required
information:
•In the Name text box, type a host device name.
•From the Type drop-down list, click the appropriate host type by
operating system.
•In the Port text box, type the host device port.
•In the WWN text box, type the host device World Wide Name
(WWN).
7 Click OK.
Modifying an FC Host 4
1 With the host selected in the FC Host dialog box, click Modify.
The Host Configuration dialog box appears.
2 As necessary, change the information in the Name and Port text
boxes, and then click the appropriate host type by operating system
from the Type drop-down list. You cannot change the World Wide
Name (WWN).
3 Click OK.
You also must make the necessary physical
changes to the name, operating system, or port
connection.