Chapter 4 Configuring Your Library
Configuring Screen Saver Preferences
Scalar i2000 User’s Guide 197
4 Under Movement, specify the position and the motion of the screen
saver image on the screen.
•Select Random to display the screen saver image in a variety of
positions.
•Select Stationary to display a static screen saver image that does
not move.
•Select Linear to display the screen saver image as a floating
image.
Enter values in the horizontal and vertical boxes to specify the movement
of the screen saver image in pixels.
Enter a value in the Motion Delay box to specify the movement speed of
the screen saver image.
5 Under Images, specify the image files to display for normal
functions, warning notices, and failure notices. You must select
image files for all three functions.
To specify an image file, click Browse. Select the image file and then click
Open. The image file must be in GIF, JPEG, or PNG format, and cannot be
larger than 1 MB. In addition, image resolution is limited to 600 x 800
pixels.
Click Preview to preview an image file.
6 Click OK to save the settings and close the Preferences dialog box.
Or click Apply to save the settings without closing the Preferences dialog
box.
7 Because you made system configuration changes, you are prompted
to save the configuration changes. For more information, see
Saving
and Restoring Library Configuration on page 256.
To Next Page
Loading...
Need help?
General