Chapter 5 Maintaining Your Library
Monitoring the Library
Scalar i2000 User’s Guide 217
The following table describes the elements on the Slots Status dialog box.
2 From the Slots Status dialog box, you can perform the following
tasks:
• Change the sorting of slots in the status list (for example, by
location or slot type) by clicking the column heading by which
you want the slots sorted. Repeatedly clicking a column heading
toggles between ascending and descending order.
• Use filtering criteria to select the slots that you want to appear in
the status list on the dialog box (see
Filtering Slots From the
Status List on page 218).
Element Description
In the Filter area:
Location: Aisle The location of slots by aisle number.
Location:
Module
The location of slots by module number.
Location: Rack The location of slots by rack number.
Location:
Section
The location of slots by section number.
Location:
Column
The location of slots by column number.
Location: Row The location of slots by row number.
In the status list area:
Media ID The slot barcode.
Location The location of the slot (see Understanding Location Coordinates on page 366).
Slot Type The type of slot media (for example, LTO).
# Puts The number of puts during the library’s history.
Partition Name The name of the partition to which the slot is assigned.
To Next Page
Loading...
Need help?
General