Chapter 5 Maintaining Your Library
Maintenance Actions
Scalar i2000 User’s Guide 282
Understanding the Verification Test Inventory 5
The verification tests generate inventory lists that provide specific
information about the library's configurations. Inventory lists for the
library, drives, and blades are available. On the Verification Test dialog
box, select the type of inventory list that you want to see (Library, Drive,
or Blade).
Library Inventory 5
This inventory list provides the following statistical information:
• Frame card serial numbers
• Power supply serial numbers
• Number of cartridges in the library
• Controller serial number and firmware information for the following:
• Management control blade
• Control management blade
• Robotic control unit or RCU
•Picker
• I/E stations
Drive Inventory 5
This inventory list provides the following information about each drive:
• Drive sled locations
• Drive sled controller serial numbers
• Drive sled controller boot and application firmware versions
• Drive brick serial numbers and firmware versions
• Drive logical serial number if the library is configured for logical
serial number addressing
Blade Inventory 5
This inventory list provides the following information about each Fibre
Channel I/O blade:
• Location of each blade
• Serial number of the blades
To Next Page
Loading...
