R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 622
CALCulate<Chn>:FILTer[:GATE]:TIME:WINDow RECT | HAMMing | HANN |
BOHMan | DCHebyshev
Selects the time gate to be applied to the time domain transform.
Channel number used to identify the active trace.
RECT – steepest edges (rectangle)
HANN – normal gate (Hann)
HAMMing – steep edges (Hamming)
BOHMan – minimum flatness (Bohman)
DCHebyshev – arbitrary gate shape (Dolph-Chebychev)
Confirmed (with some device-specific parameters), command or query
See CALCulate<Chn>:FILTer[:GATE]:TIME:DCHebychev
CALCulate<Chn>:FORMat...
This subsystem determines a post-processing of the measured data in order to obtain various display
formats.
CALCulate<Chn>:FORMat MLINear | MLOGarithmic | PHASe | UPHase | POLar |
SMITh | ISMith | GDELay | REAL | IMAGinary | SWR | COMPlex | MAGNitude
Defines how the measured result at any sweep point is post-processed and presented in the graphical
display.
Note: The analyzer allows arbitrary combinations of display formats and measured quantities; see Trace -
Format and CALCulate<Chn>:PARameter... commands. Nevertheless, it is advisable to check which
display formats are generally appropriate for an analysis of a particular measured quantity; see Measured
Quantities and Display Formats.
Channel number used to identify the active trace.
See list of parameters below.
Confirmed, command or query
CALC4:PAR:SDEF 'Ch4Tr1', 'S11'
Create channel 4 and a trace named Ch4Tr1 to measure the input reflection
coefficient S11. The trace becomes the active trace in channel 4.
CALC4:FORM MLIN; :DISP:WIND:TRAC2:FEED 'CH4TR1'
Calculate the magnitude of S11 and display it in a linearly scaled Cartesian
diagram assigning the trace number 2.
Assume that the result at a sweep point is given by the complex quantity z = x + jy. The meaning of the
parameters is as follows (see also table in CALCulate<Chn>:MARKer<Mk>:FORMat description):
To Next Page
Loading...
