R&S ZVB - Page 662

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 647
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DELTa:STATe <Boolean>
[Deprecated command]
Switches the delta mode for marker <Mk> on trace no. <Chn> on or off.
Note: This command is the ZVR-compatible equivalent of
CALCulate<Chn>:MARKer<Mk>:DELTa[:STATe].
<Chn>
Channel number used to identify the active trace
<Mk>
Marker number in the range 1 to 10
<Boolean>
ON | OFF - Enables or disables the delta mode
*RST value
OFF
SCPI, Command Types
Device-specific, command or query.
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER <range_no>
Assigns a search range no. <numeric_value> to marker no <Mk> and selects the search range, e.g. in
order to display range limit lines or define the start and stop values.
<Chn>
Channel number used to identify the active trace
<Mk>
Marker number in the range 1 to 10
<range_no>
Number of the search range
Range [def. unit]
0 – fixed full span search range (equal to the sweep range)
1 to 10 – user-definable search ranges; see example
*RST value
0 (reserved for full span search range)
SCPI, Command Types
Device-specific, command or query.
Example:
CALC1:MARK1:FUNC:DOM:USER 2
Select the search range no. 2, assigned to marker no. 1 and trace no. 1.
CALC:MARK:FUNC:DOM:USER:STARt 1GHz
Set the start frequency of the search range to 1 GHz.
CALC:MARK:FUNC:DOM:USER:STOP 1.2GHz
Set the stop frequency of the search range to 1.2 GHz.
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER:SHOW <Boolean>
Displays or hides range limit lines for the search range selected via
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER <range_no>.
This command is not available if the search range is Full Span (<range_no> = 0).
<Chn>
Channel number used to identify the active trace
<Mk>
Marker number in the range 1 to 10
<Boolean>
ON | OFF - Range limit lines on or off
*RST value
OFF