R&S ZVB - Page 699

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 684
CALCulate<Chn>:STATistics:DOMain:USER:SHOW,
CALCulate<Chn>:STATistics:DOMain:USER:STARt and
CALCulate<Chn>:STATistics:DOMain:USER:STOP commands.
<Chn>
Channel number used to identify the active trace. If unspecified the numeric
suffix is set to 1.
<range_no>
Number of the evaluation range.
Range [def. unit]
1 to 10. In addition, 0 denotes the (non-configurable) Full Span evaluation
range. [–]
*RST value
0
SCPI, Command
Types
Device-specific, command or query.
Example:
*RST; :CALC:STAT:DOM:USER?
Query the default evaluation range. The response is zero, i.e. the evaluation
range is equal to the complete sweep range
CALC:STAT:DOM:USER 1; :CALC:STAT:DOM:USER:STARt 1GHZ; STOP 2GHZ; SHOW ON
Select evaluation range no. 1 and define the evaluation range between 1 GHz
and 2 GHz. Display the range limit lines.
CALCulate<Chn>:STATistics:DOMain:USER:SHOW <Boolean>
Displays or hides range limit lines for the evaluation range selected via
CALCulate<Chn>:STATistics:DOMain:USER.
<Chn>
Channel number used to identify the active trace.
<Boolean>
ON | OFF - Range limit lines on or off.
*RST value
OFF
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Chn>:STATistics:DOMain:USER
CALCulate<Chn>:STATistics:DOMain:USER:STARt <start_value>
Defines the start value of the evaluation range selected via
CALCulate<Chn>:STATistics:DOMain:USER.
<Chn>
Channel number used to identify the active trace.
<start_value>
Start value of the evaluation range.
Range [def. unit]
–1000 GHz to 999.999999999 GHz. [Hz]
*RST value
Lowest frequency of the analyzer, depending on the analyzer model.
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Chn>:STATistics:DOMain:USER