R&S ZVB - Page 700

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 685
CALCulate<Chn>:STATistics:DOMain:USER:STOP <stop_value>
Defines the stop value of the evaluation range selected via
CALCulate<Chn>:STATistics:DOMain:USER.
<Chn>
Channel number used to identify the active trace.
<stop_value>
Stop value of the evaluation range.
Range [def. unit]
–999.999999999 GHz to 1000 GHz. [Hz]
*RST value
Highest frequency of the analyzer, depending on the analyzer model.
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Chn>:STATistics:DOMain:USER
CALCulate<Chn>:STATistics:EPDelay[:STATe] <Boolean>
Displays or hides the Phase Delay/El Length results in the diagram area of trace no. <Chn>.
<Chn>
Channel number used to identify the active trace.
<Boolean>
ON | OFF - Statistical info field on or off.
*RST value
OFF
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Chn>:STATistics:[:STATe]
CALCulate<Chn>:STATistics:MMPTpeak[:STATe] <Boolean>
Displays or hides the Min/Max/Peak-Peak results in the diagram area of trace no. <Chn>.
<Chn>
Channel number used to identify the active trace.
<Boolean>
ON | OFF - Statistical info field on or off.
*RST value
OFF
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Chn>:STATistics:[:STATe]
CALCulate<Chn>:STATistics:MSTDdev[:STATe] <Boolean>
Displays or hides the Mean/Std Dev results in the diagram area of trace no. <Chn>.
<Chn>
Channel number used to identify the active trace.
<Boolean>
ON | OFF - Statistical info field on or off.
*RST value
OFF