Rohde & Schwarz R&S SMB100B - Page 147

List and sweep mode
R&S
®
SMB100B
147User Manual 1178.3711.02 ─ 08
"Frequency /Hz"
Sets the frequency values.
Remote command:
[:SOURce<hw>]:LIST:FREQuency on page 479
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency
on page 449
"Power /dBm" (list mode data table)
Sets the level values.
Remote command:
[:SOURce<hw>]:LIST:POWer on page 480
"Correction Value /dBm" (user correction data table)
Sets the level values.
Remote command:
[:SOURce<hw>]:CORRection:CSET:DATA:POWer on page 449
"Dwell /s"
In list mode, sets the dwell time values.
Remote command:
[:SOURce<hw>]:LIST:DWELl:LIST on page 478
Data handling keys
Standard functions for file and data handling.
Go To ← Data handling keys
Selects a row for editing.
Edit ← Data handling keys
Enables you to insert, or delete a row or ranges within a list, and provides access to a
dialog for automatic filling, see "Fill..." on page 93.
Fill with Sensor ← Data handling keys
Opens a dialog to configure the automatic filling of user correction data with an R&S
NRP power sensor. Available in UCOR mode only.
See Chapter 7.3.3, "Fill with sensor", on page 164
Save As/Save ← Data handling keys
Stores the list in a file with user-defined name and predefined file extension. To save a
copy or create a file, use the "Save as" function.
Fill...
Provides parameters for filling a table automatically with user-defined values.
List editor