Rohde & Schwarz SMBV100A - Page 178

Instrument Function
R&S
®
SMBV100A
163Operating Manual 1176.8016.02 ─ 17
Recent files
Displays the files last used.
Directory, File List and File Name
Note:
You access this generic standard function each time you perform one of the following:
●
store or load (settings) files
●
define a folder these files are to be stored in or
●
navigate through the file system.
The name of the dialog is context sensitive but the provided functions are self-explana-
tory and very similar.
With the provided settings, you can perform the following:
●
to navigate through the file system, use the directory tree
●
to create a new file, load and store files, use the dedicated functions "New",
"Select", "Save" and Recent files.
●
to perform standard file management functions, like create new directories, move,
copy, delete files and/or directories, use the standard "File Manager" function (see
" File Manager" on page 162).
Remote command:
to list all files in a directory:
:MMEMory:CDIRectory on page 568
:MMEMory:CATalog? on page 567
refer to the description of firmware options for the syntax of the corresponding SCPI
command:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:CATalog
[:SOURce]:CORRection:CSET:CATalog? on page 723
to list files with user data:
[:SOURce<hw>]:BB:DM:DLISt:CATalog? on page 675
[:SOURce<hw>]:BB:DM:CLISt:CATalog? on page 675
Exclude Frequency
The current frequency is retained when a saved instrument setting is loaded.
Remote command:
[:SOURce<hw>]:FREQuency[:CW|FIXed]:RCL on page 737
Exclude Level
The current level is retained when a saved instrument setting is loaded.
Remote command:
[:SOURce<hw>]:POWer[:LEVel][:IMMediate]:RCL on page 789
General Instrument Settings