Rohde & Schwarz SMBV100A - Page 377

Instrument Function
R&S
®
SMBV100A
362Operating Manual 1176.8016.02 ─ 17
See "Trigger/Marker/Clock" on page 371.
Remote command:
n.a.
Execute Trigger
Executes trigger manually. A manual trigger can be executed only when an internal
trigger source and a trigger mode other than Auto have been selected.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger:EXECute on page 655
Clock
Calls the "Trigger/Marker/Clock" menu. The "Trigger/Marker/Clock" menu is used to
select the clock source (see "Clock Settings" on page 377).
Remote command:
n.a.
List Management
The "List Management" menu is called from the "Custom Digital Modulation" main
menu.
The data and control lists are selected and created in the "File Select" menu which is
called up by means of the "Data List..." and "Control List..." buttons.
The "File Manager" is used to copy, rename and delete files and to create directories.
For more information, see Chapter 4.7, "File Management", on page 105.
To ensure that the selected data or control list is used for generating the digital signal,
the list must be selected as the data source:
Baseband Signal - Baseband Block