Rohde & Schwarz SMBV100A - Page 378

Instrument Function
R&S
®
SMBV100A
363Operating Manual 1176.8016.02 ─ 17
Data Parameter Selection
Digital data "Source" DList
Marker "Marker Mode" CList
Control signals
CW, Level Attenuation and Burst
Gate
"Source" Internal
The data editor is called using the "Edit Data List..." and "Edit Control List ..." buttons.
The contents of the selected list are displayed.
Operating the list editors is described in Chapter 4.5.1, "Working with List Editor",
on page 97.
Select Data/Control List
Selects data/control list. This opens the "File Select" window in which the data/control
list can be selected.
Remote command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 681
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 678
Create Data/Control List
Creates new data/control list. This opens the "File Select" window in which the data/
control list can be created.
The file name has to be entered in field "File Name:". The new list contains no data, it
can be edited in the list editor.
Remote command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 681
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 678
File Manager
Calls the "File Manager".
The "File Manager" is used to copy, delete and rename files and to create new directo-
ries.
For detailed description, see Chapter 4.7.2, "File Manager", on page 108.
Remote command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 681
[:SOURce<hw>]:BB:DM:DLISt:COPY on page 676
[:SOURce<hw>]:BB:DM:DLISt:DELete on page 680
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 678
[:SOURce<hw>]:BB:DM:CLISt:COPY on page 676
[:SOURce<hw>]:BB:DM:CLISt:DELete on page 678
Baseband Signal - Baseband Block