Remote Control Commands
R&S
®
SMBV100A
621Operating Manual 1176.8016.02 ─ 17
Return values:
<Conflict> 0 | 1 | OFF | ON
*RST: 0
Example:
BB:ARB:MCAR:CARR2:CONF?
queries the multi carrier conflict state.
Response: 0 no conflict has occurred.
Usage: Query only
Manual operation: See " !!! " on page 435
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:DELay <Delay>
Sets the start delay of the selected carrier.
Parameters:
<Delay> float
Range: 0 to 1
Increment: 1E-9
*RST: 0
Default unit: s
Example:
BB:ARB:MCAR:CARR15:DEL 5us
sets a start delay of 50 us for carrier 15.
Manual operation: See " Delay " on page 435
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:FILE <File>
Selects the file with I/Q data to be modulated onto the selected carrier.
Parameters:
<File> <file name>
Example:
BB:ARB:MCAR:CARR15:FILE "/var/user/IQ_wcdma"
selects file IQ_wcdma. The data of the file is modulated onto
carrier 15.
Manual operation: See " File " on page 435
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:FREQuency <Frequency>
Sets or indicates the carrier frequency, depending on the selected carrier frequency
mode.
The carrier frequency can be set in "Arbitrary Carrier frequency" mode. For "Equidis-
tant Carrier Spacing", the carrier spacing is determined automatically.
SOURce Subsystem
To Next Page
Loading...
