Ross Vision - Next Transition Select; Transition Parameters

Vision Operator’s Manual (v12.0 MD) Transitions • Ops 5–3
Next Transition Select
The Next Transition Select buttons allows you to select what will be included in the next
transition that is performed on the Transition Module. Above each of the Key X buttons is an
indicator that lights to show which keyers are on-air, or active. The indicators light red if the
keyer is on-air, or another color if the keyer is active on the MLE or AuxKey, but is not part of the
Program out. The active, but not part of the Program output, color is user definable.
Figure 5.3 Next Transition Select — Transition Module (4-Keyer Shown)
Operating Tip — Double-press the BKGD button to select background and all of the on-air
keys. The Double-Press BKGD personality option must be set to Trans Clean.
A transition can include almost any combination of Background and Keyers, depending on what
type of transition you are trying to perform. The Next Transition Select buttons do not indicate
what keyers will be going on-air, only that a keyer is going to be transitioned. To determine if a
keyer is going to be transitioned on-air or off, you must look at the indicators above the Key X
buttons.
For More Information...
• on including a keyer in a transition, refer to the section “Performing Transitions” on
page Ops 5-12.
• on assigning colors to the indicators and buttons, refer to the section “Control Panel
Button Color Schemes” on page Eng 11-14.
Transition Parameters
The Transition Parameter buttons (Figure 5.4) allow you to have the next transition perform a
preset black or key over transition, set a transition limit, or preview the transition.
Figure 5.4 Transition Parameters — Transition Module (4-Keyer Shown)
T RANSITION
FRAMES
PST
BKGD
TRANS
PV
KEY
PRIOR
TRANS
LIMIT
DISS
ROLL
CLIP
WIPE DVE SEQ
CUT
AUTO
TRANS
T
RAN
S
ITI
ON
FRAMES
PS
T
BK
G
D
T
RAN
S
PV
KEY
P
RI
OR
TRAN
S
LIMIT
DI
SS
R
O
LL
C
LI
P
WIPE DVE
S
E
Q
CU
T
AU
T
O
TRAN
S
BKGD KEY 1 KEY 2 KEY 3 KEY 4
BKGD
T RANSITION
KEY 1 KEY 2
FRAMES
DISS WIPE DVE SEQ
CUT
AUTO
TRANS
KEY 3 KEY 4
BKGD
T
RAN
S
ITI
ON
KEY 1
K
EY
2
FRAMES
DI
SS
WIPE DVE
S
E
Q
CU
T
AU
T
O
TRAN
S
K
EY
3
K
EY
4
ROLL
CLIP
PST
BKGD
TRANS
PV
KEY
PRIOR
TRANS
LIMIT