Vision Operator’s Manual (v12.0 MD) WARP Effects • Ops 17–7
Globe WARP
The Globe WARP wraps the key video around a globe shape. Once formed, lighting and
movement effects can be added to the globe.
Use the following procedure to set up a Globe WARP:
1. Select and activate the Globe WARP effect on the keyer you want to apply it.
2. Press Rotation on the S&T WARP Menu.
Globe (Rotation) — S&T WARP Menu
3. Create the globe as follows:
•Use the Creation knob on the S&T WARP Menu, or the positioner, to select
100%. You can only apply the parameters of the WARP to the key when it is fully
created.
•Use the X-Rot knob on the S&T WARP Menu, or the positioner, to rotate the key
video around the globe horizontally.
•Use the Y-Rot knob on the S&T WARP Menu, or the positioner, to rotate the key
video around the globe vertically.
4. Adjust the position of the effect as follows:
• Press Position on the S&T WARP Menu.
Globe (Position) — S&T WARP Menu
•Use the X-Pos knob on the S&T WARP Menu, or the positioner, to adjust the
horizontal position of the globe.
•Use the Y-Pos knob on the S&T WARP Menu, or the positioner, to adjust the
vertical position of the globe.
To Next Page
Loading...
