Ops 9–14 • Still-Store Vision Operator’s Manual (v12.0 MD)
Transferring Stills Using USB
If you do not want to create a network connection to the switcher, you can copy stills using a USB
drive. The stills must be the only files on the USB, and be located at the root directory.
Use the following procedure to copy stills from a USB drive to the switcher:
1. Copy the stills that you want to transfer to the switcher to the root directory, of a blank
USB drive.
2. Insert the USB drive into the USB port on the top of the Vision control panel.
3. Navigate to the Select Still Menu as follows:
• Press HOME B Effects B Still Store B Select/Manage.
Select Still Menu 1-2
4. Press Copy From USB on the Select Still Menu 1-2. All valid still-store images on the
USB drive are copied to the USB folder on the switcher.
This completes the procedure for copying stills from a USB drive to the switcher.
To Next Page
Loading...
