Ross Vision - Pixie Dust WARP

Ops 17–24 • WARP Effects Vision Operator’s Manual (v12.0 MD)
Pixie Dust WARP
The Pixie Dust WARP creates an exploded pixelation effect bound in an oval or rectangle that can
be positioned over part of the key video.
Use the following procedure to set up a Pixie Dust WARP:
1. Select and activate the Pixie Dust WARP effect on the keyer you want to apply it.
2. Press Position on the S&T WARP Menu.
Pixie Dust (Position) — S&T WARP Menu
3. Adjust the pixelation of the effect as follows:
•Use the (X) knob on the S&T WARP Menu, or the positioner, to adjust the
horizontal position of the effect.
•Use the (Y) knob on the S&T WARP Menu, or the positioner, to adjust the vertical
position of the effect.
•Use the Size knob on the S&T WARP Menu, or the positioner, to adjust the size of
the effect.
4. Adjust the shape of the effect as follows:
• Press Shape on the S&T WARP Menu.
Pixie Dust (Shape) — S&T WARP Menu
•Use the Aspect knob on the S&T WARP Menu, or the positioner, to adjust the
aspect ratio of the pixie dust effect area.
•Use the Pattern knob on the S&T WARP Menu to select the shape of the pixie
dust effect area.