Ops 1–2 • Introduction Vision Operator’s Manual (v12.0 MD)
About This Manual
This manual takes you through the operation of the Vision control panel and Octane/QMD-X,
MD-X, QMD, or MD frame.
If, at any time, you have a question pertaining to the installation of your Ross Vision switcher,
please contact us at the numbers listed in the front of this manual. Our technical staff are always
available for consultation, training, or service.
For information on operating external devices from your Vision switcher, refer to the Ross Video
External Device Setup Sheet for your device.
To Next Page
Loading...
