Vision Operator’s Manual (v12.0 MD) Peripheral Control • Ops 10–13
Audio Level Adjustment
You can adjust the audio level for a particular channel, or the Master level, and the Pan settings,
using the Assign Audio custom control.
Use the following procedure to adjust the volume and pan settings of a selected audio channel:
1. Press the custom control button that is assigned to the channel, or group, that you want
to adjust the audio levels for. The Audio Menu is displayed.
Audio Menu
2. Adjust the audio level for a channel as follows:
• Press Audio Level on the Audio Menu to select all the channels in a group, or
select an individual channel. If you did not select a group, the individual channel
will already be selected.
•Use the Level knob on the Audio Menu to adjust the audio level.
3. Adjust the pan for an audio channel as follows:
• Select the audio channel you want to adjust the pan for.
•Use the Pan knob on the Audio Menu to adjust the pan setting. Turning the knob to
the right will pan right.
4. Adjust the Master audio level as follows:
• Press Master Level on the Audio Menu.
•Use the Master knob on the Audio Menu to select the master level you want to
adjust. If the Audio Mixer only supports one master level, you cannot adjust this
knob.
•Use the Level knob on the Audio Menu to adjust the master audio level.
This completes the procedure for adjusting the volume and pan settings of a selected audio
channel.
For More Information...
• on the Assign Audio custom control, refer to the section “Programming Special
Functions” on page Eng 10-15.
To Next Page
Loading...
