Vision Operator’s Manual (v12.0 MD) WARP Effects • Ops 17–31
Star WARP
The Star WARP places the key video inside a star shape. As you create the WARP, the star shape
will shrink down around the key and then fly off with the key. The direction and speed that it
moves is determined by the settings.
The color of the border of the star can also be changed.
Use the following procedure to set up a Star WARP:
1. Select and activate the Star WARP effect on the keyer you want to apply it.
2. Press Position on the S&T WARP Menu.
Star (Position) — S&T WARP Menu
3. Create the star as follows:
•Use the X-Pos knob on the S&T WARP Menu, or the positioner, to adjust the
horizontal position of the center point of the star on screen.
•Use the Y-Pos knob on the S&T WARP Menu, or the positioner, to adjust the
vertical position of the center point of the star on screen.
•Use the Size/Creation knob on the S&T WARP Menu, or the positioner, to move
the star through the path of the WARP.
4. Adjust the rotation of the effect as follows:
• Press Rotation on the S&T WARP Menu.
Star (Rotation) — S&T WARP Menu
•Use the X-Rotation knob on the S&T WARP Menu, or the positioner, to adjust
the number of horizontal rotations the star does along the path of the WARP.
•Use the Y-Rotation knob on the S&T WARP Menu, or the positioner, to adjust
the number of vertical rotations the star does along the path of the WARP.
To Next Page
Loading...
