Ops 17–32 • WARP Effects Vision Operator’s Manual (v12.0 MD)
•Use the Z-Rotation knob on the S&T WARP Menu, or the positioner, to adjust
the number of clockwise, or counter-clockwise, rotations the star does along the
path of the WARP.
5. Adjust the shape of the star as follows:
• Press Shape on the S&T WARP Menu.
Star (Shape) — S&T WARP Menu
•Use the Num Pts knob on the S&T WARP Menu, or the positioner, to adjust the
number of points on the star.
•Use the Pt Size knob on the S&T WARP Menu, or the positioner, to adjust the
size of the points on the star.
•Use the Border Size knob on the S&T WARP Menu, or the positioner, to adjust
the size of the border on the star.
6. Adjust the color of the border of the star as follows:
• Press Border Color on the S&T WARP Menu.
Star (Border Color) — S&T WARP Menu
•Use the Luminance knob on the S&T WARP Menu, or the positioner, to adjust
the luminance of the border color.
•Use the Saturation knob on the S&T WARP Menu, or the positioner, to adjust the
saturation of the border color.
•Use the Hue knob on the S&T WARP Menu, or the positioner, to adjust the hue of
the border color.
To Next Page
Loading...
