Vision Operator’s Manual (v12.0 MD) Peripheral Control • Ops 10–21
Monitor Wall Interface Control
The Monitor Wall custom controls allow you to control various aspects of the Monitor Wall from
the switcher. These includes loading a layout, changing input channels, and modifying dynamic
text.
Layouts
The layout custom control allows you to load a specific layout on the Monitor Wall. A different
custom control must be created for each layout you want to load from the switcher.
Input Channels
The assign input custom control allows you to assign a specific input channel to a particular
monitor on the monitor wall. A different custom control must be created for each channel
assignment you want to use from the switcher.
Dynamic Text
The modify text custom control allows you to assign specific, pre-defined, text to a particular text
address. The text address must be assigned to a template for the custom control to be able to
change the text. A different custom control must be created for each text change you want to
make from the switcher.
To Next Page
Loading...
